AiM MXG Data Logging System - 7in Color Display
The AiM MXG data logging dash represents a huge leap forward in racing display flexibility. The brilliant 800 x 480 pixel (7" diagonal) TFT display frees you from the constraints of a single, factory-designed LCD display. The MXG shows you the data you want, the way you want.
Eight analog input channels can sample, log, and display a wide range of temperatures, pressures, potentiometers (throttle position, steering position, etc.), or whatever sensors you wish to monitor. A CAN input allows you to further expand the dash by adding an almost limitless number of AiM CAN Data Hubs. These Hubs let you connect other inputs such as Lambda (LCU-One/O2), SmartyCam, or even Channel Expansion Hubs, without using any analog channels! The MXG can also be connected to many different ECUs to log any data gathered by the ECU. An internal three-axis accelerometer sensor, internal gyroscope, GPS08 module, four wheel speed channels, a lap receiver input, and 2 digital outputs round out the package. It all adds up to a flexible, expandable data logger that can grow with you.
The large anodized aluminum housing is designed to fit in your race car and still allow you to see what's going on. The wide, auto-dimming display can be set by the user to a number of different full-color screen designs. You can even create up to 8 different pages, all using different screen designs. 10 configurable shift light LEDs across the top of the housing and 8 configurable alarm LEDs along the sides can all be programmed with any of 7 colors. Each alarm can be programmed with a steady or flashing LED, a custom text message on the screen, and multiple conditions (for example, oil pressure below 60 psi and engine speed above 4,000 RPM... or over-rev by 200 RPM keeps the light on steady until power-off, while over-rev by 500 RPM makes the same light flash until data is downloaded... ). Two digital outputs (1 AMP at 12V) can be used to trigger external warning lights, fan relays, etc. based on similar logic as the alarms. The shift lights can be programmed separately for each gear, if desired. Set them to come on sooner in low gears and closer to redline in high gears, set different colors for each gear, and more!
The 4GB non-volatile memory can store hours of information for detailed analysis using AiM's latest RaceStudio 3 software. All of the data can be downloaded to your computer using a built-in secure Wi-Fi connection (no cable required). Requires 9-15V external power supply.
Kit includes MXG data logging display, wiring harness with 37 pin Deutsch connector, GPS08 module, and RaceStudio 3 software. All sensors sold separately.
Note: Analog channels 5-8, speed inputs 2-4, digital outputs, and RS232 ECU connection require the addition of the AiM Auxiliary Wiring Harness with the 22-pin Autosport connector (sold separately).
Brightness…700cd/m2, 1,100 Lumens
Ambient Light Sensor…Yes
Alarm LEDs…8 RGB freely configurable
Shift Lights…10 integrated freely configurable RGB LEDs
ECU Connections…CAN, RS232, or K-Line
ECU Compatibility…1,000+ industry leading ECUs
CAN Expansion Connections…GPS, Channel Expansion, TC Expansion, LCU-One, and SmartyCam HD
Analog Inputs…8 freely configurable (1,000Hz each maximum setting)
Digital Inputs…4 digital speed inputs, lap signal, and coil RPM input
Digital Outputs…2 (1AMP max each)
Accelerometer…Internal three axis ± 5G and three axis Gyroscope
Connectors…2 Autosport connectors