Site Information

 Loading... Please wait...
  • BMW E36 M3 Carbon Fiber Front Splitter. Front View.
  • Bottom left side view of HARD Motorsport BMW E46 M3  Carbon Fiber Front Splitter with support Bracket.
  • Top right side view of HARD Motorsport BMW E46 M3  Carbon Fiber Front Splitter with support Bracket.

HARD Motorsport Carbon Fiber Front Splitter - E46

$569.00
SKU:
SPLITTERCF.E46
::FREE SHIPPING IN USA::
Quantity:

Product Description

HARD Motorsport True Carbon Fiber Front Splitter for the E46 M3 and non-M with the M3 style bumper. 

Features:

  • HI-QUALITY CARBON FIBER CONSTRUCTION.
  • NO FIBERGLASS. NO FIBERGLASS & NO FIBERGLASS.
  • VACUUM INFUSION PROCESS MANUFACTURING.
  • ONLY 6 POUNDS. LIGHTEST FULL SPLITTER AVAILABLE.
  • OVER 60% LIGHTER THAN OTHER CF SPLITTERS.
  • CF WRAPPED AND REINFORCED EDGES.
  • NO PLASTIC LEADING EDGE COVER.
  • NOT CUT FROM PRE-MANUFACTURED CF SHEETS.
  • LIGHTWEIGHT CORE.
  • VERY STURDY WITH LITTLE FLEX.
  • NOT CUT FROM A PRE-MANUFACTURED SHEET.

Our Carbon Fiber splitters are made with ONLY high quality carbon fiber and a sturdy, lightweight core. INFUSION manufacturing keeps the weight down. No heavy resin buildup.
At just 6 pounds, these are the lightest and strongest splitters that we've seen. Other comparable splitters can weigh around 20 pounds.

ABSOLUTELY NO FIBERGLASS filler like many parts that claim to be CF.  These are true carbon fiber, not just a dressed up fiberglass part.
We don't apply a clear-coat or gelcoat to keep these as LIGHT as possible.  You may certainly choose to clearcoat this part if you like.  We do recommend using a quality wax for UV protection.

Dimensions:

  • 66.75" wide - It extends about 1.25" further than the sides of the stock M3 bumper
  • 23.75" depth - You can adjust how far the splitter will extend when you mount it. Max is about 4.5"
  • .35" thick - 

 

Option: HARD Motorsport Rear Support Brackets for Front Splitters

Our support brackets offer a simple solution to secure the Splitter to the chassis/frame. It comes with all the necessary hardware! 2" of adjustability allows for different bumpers and lip combinations. We recommend the ACS style Front Lower Lip/extension. This helps close the gap that the short, stock front bumper cover leaves.

The stock M3 bumper is fairly high without some added lower lip. The shape of the bottom of the bumper itself does not allow use of a flat splitter like this, so naturally, a lot of air would simply spill through the gaps below the bumper. The other issue is, the M3 comes with quite a bit of plastic splash shielding/shrouding under and around the radiator and coolers. If you were to look straight under the car, you would see that the front bumper does not even drop below all of that obstruction.
 
Our supports were designed to help clear much of that original shrouding when 'compressed' to the lowest setting.  There is a workaround, but it does require modifying the upper part of the support bracket.  

Dimensions:

  • 66.75" wide - It extends about 1.25" further than the sides of the stock M3 bumper
  • 23.75" depth - You can adjust how far the splitter will extend when you mount it. Max is about 4.5"
  • .25" thick 

Note: Fits both M and non-M cars.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category